Here are the instructions with video on how to calibrate the optical comparator of the GPL Z9000 natural gas odorizer.
The optical comparator and optical arrays use fiber optics to count the odorant drops as they drop through the drip chamber and into the line. It is this precise counting of measured drops that permit accurate injection.
The optical array on one side of the drip chamber conveys a beam to the array on the other side. When the beam strength suddenly changes, the comparator registers a drop and sends a signal to the Mixed I/O control board. Continue reading
Here are the instructions on how to calibrate the Servo on the GPL Z9000 natural gas odorizer. Zeck Systems/Sentry Equipment originally manufactured this odorization system.
GPL Z9000 Odorizer Servo Calibration
The Servo controls the position of the metering valve during normal operations in the GPL Z9000 odorizer. It opens and closes the valve as necessary to maintain the desired drop rate. As part of the biannual odorizer inspection program, remove the Servo and inspect the metering valve to assure it is operating smoothly.
From time to time, the Servo needs calibration or even replacement. If your unit requires a new Servo, contact GPL Odorizers or (303) 927-7683 or Linc Energy Systems. When performing the calibration on the line with low flow, close your odorant source valve coming from your odorant tank. Continue reading
The following is the recommended preventative maintenance for the GPL Z9000 natural gas odorizer. These are guidelines and may vary depending on each site’s circumstances and history of performance. Also, a perfect place to acquaint yourself with this odorant injection system is the GPL Z9000 Instructional Video page. Continue reading